YOKOGAWA DLM4038 User Manual

5-268
IM DLM4038-17EN
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator?
Function Queries all indicator settings for the ID and data
conditions for FlexRay bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator?
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:MODE
Function Sets or queries the indicator enable/disable
condition, which is one of the ID and data
conditions, for FlexRay bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:MODE {<Boolea
n>}
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:MODE?
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:IND
ICATOR:MODE ON
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:IND
ICATOR:MODE?
-> :TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
INDICATOR:MODE 1
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:NFRame
Function Sets or queries the indicator null frame, which is
one of the ID and data conditions, for FlexRay
bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:NFRame {0|1|X}
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:NFRame?
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:IND
ICATOR:NFRAME 1
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:IND
ICATOR:NFRAME?
-> :TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
INDICATOR:NFRAME 1
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:PPReamble
Function Sets or queries the indicator payload preamble,
which is one of the ID and data conditions, for
FlexRay bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:PPReamble {0|
1|X}
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:PPReamble?
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:IND
ICATOR:PPREAMBLE 1
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:IND
ICATOR:PPREAMBLE?
-> :TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
INDICATOR:PPREAMBLE 1
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:STFRame
Function Sets or queries the indicator start frame, which
is one of the ID and data conditions, for FlexRay
bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:STFRame {0|1|
X}
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:STFRame?
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:IND
ICATOR:STFRAME 1
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:IND
ICATOR:STFRAME?
-> :TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
INDICATOR:STFRAME 1
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:SYFRame
Function Sets or queries the indicator sync frame, which
is one of the ID and data conditions, for FlexRay
bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:SYFRame {0|1|
X}
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:SYFRame?
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:IND
ICATOR:SYFRAME 1
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:IND
ICATOR:SYFRAME?
-> :TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
INDICATOR:SYFRAME 1
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray:IDOR?
Function Queries all OR condition settings for FlexRay bus
signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray:IDOR?
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray:IDOR:ID<x>?
Function Queries all the settings of the frame IDs, which
are OR conditions, for FlexRay bus signal
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray:IDOR:ID<x>?
<x> = 1 to 4
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray:IDOR:ID<x>:CCOunt?
Function Queries the cycle-count setting for the frame IDs
for FlexRay bus signal triggering (this is one of
the OR conditions).
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray:IDOR:ID<x>:CCOunt?
<x> = 1 to 4
5.34 TRIGger Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English