YOKOGAWA DLM4038 User Manual

5-281
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:TRIGger{[:ATRigger]|:BTRigger}:PATT
ern:{PODA|PODB|PODL}:HEXa
Function Sets the logic input state of the state trigger in
hexadecimal notation.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:PATT
ern:{PODA|PODB|PODL}:HEXa {<String>}
Example
:TRIGGER:ATRIGGER:PATTERN:PODL:HE
XA "1F"
:TRIGger{[:ATRigger]|:BTRigger}:PATT
ern:{PODA|PODB|PODL}:PATTern
Function Sets or queries the logic input state of the state
trigger with a pattern.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:PATT
ern:{PODA|PODB|PODL}:PATTern {<Strin
g>}
:TRIGger{[:ATRigger]|:BTRigger}:PATT
ern:{PODA|PODB|PODL}:PATTern?
Example
:TRIGGER:ATRIGGER:PATTERN:PODL:PATTE
RN "10111000"
:TRIGGER:ATRIGGER:PATTERN:PODL:PATTE
RN?
-> :TRIGGER:ATRIGGER:PATTERN:PODL:PA
TTERN "10111000"
:TRIGger{[:ATRigger]|:BTRigger}:QUAL
ify?
Function Queries all edge qualify trigger settings.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:QUAL
ify?
:TRIGger{[:ATRigger]|:BTRigger}:QUAL
ify:CHANnel<x>
Function Sets or queries the conditions for a waveform for
edge qualified triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:QUAL
ify:CHANnel<x> {DONTcare|HIGH|IN|LOW
|OFF|OUT}
:TRIGger{[:ATRigger]|:BTRigger}:QUAL
ify:CHANnel<x>?
<x> = 1 to 8
Example
:TRIGGER:ATRIGGER:QUALIFY:CHANNEL1 H
IGH
:TRIGGER:ATRIGGER:QUALIFY:CHANNEL1?
-> :TRIGGER:ATRIGGER:QUALIFY:CHANNEL
1 HIGH
Description If
:TRIGger:SOURce:CHANnel<x>:WIND
ow
is set to ON, select from
{IN|OFF|OUT}
,
otherwise, select from
{DONTcare|HIGH|LOW}
.
:TRIGger{[:ATRigger]|:BTRigger}:QUAL
ify:CONDition
Function Sets or queries the trigger source qualify
conditions for edge qualified triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:QUAL
ify:CONDition {FALSe|TRUE}
:TRIGger{[:ATRigger]|:BTRigger}:QUAL
ify:CONDition?
Example
:TRIGGER:ATRIGGER:QUALIFY:CONDITI
ON FALSE
:TRIGGER:ATRIGGER:QUALIFY:CONDITION?
-> :TRIGGER:ATRIGGER:QUALIFY:CONDITI
ON FALSE
:TRIGger{[:ATRigger]|:BTRigger}:SE
NT?
Function Queries all SENT signal trigger settings.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
SENT?
:TRIGger{[:ATRigger]|:BTRigger}:SENT
:CEFactor?
Function Queries all SENT signal trigger error factor
settings.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
SENT:CEFactor?
:TRIGger{[:ATRigger]|:BTRigger}:SENT
:CEFactor:SAComm?
Function Queries all status and communication error factor
settings of SENT signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
SENT:CEFactor:SAComm?
:TRIGger{[:ATRigger]|:BTRigger}:SENT
:CEFactor:SAComm:BIT<x>
Function Sets or queries status and communication error
factor bit of SENT signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
SENT:CEFactor:SAComm:BIT<x> {<Boolea
n>}
:TRIGger{[:ATRigger]|:BTRigger}:
SENT:CEFactor:SAComm:BIT<x>?
<x> = 0, 1
Example
:TRIGGER:ATRIGGER:SENT:CEFACTOR:SACO
MM:BIT1 ON
:TRIGGER:ATRIGGER:SENT:CEFACTOR:SACO
MM:BIT1?
-> :TRIGGER:ATRIGGER:SENT:CEFACTOR:S
CPULSES 1
5.34 TRIGger Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English