YOKOGAWA DLM4038 - Page 315

5-282
IM DLM4038-17EN
:TRIGger{[:ATRigger]|:BTRigger}:SENT
:CEFactor:SCPulses
Function Sets or queries the consecutive calibration pulse
error factor of SENT signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
SENT:CEFactor:SCPulses {OFF|OPT2|POP
Tion}
:TRIGger{[:ATRigger]|:BTRigger}:
SENT:CEFactor:SCPulses?
Example
:TRIGGER:ATRIGGER:SENT:CEFACTOR:SCPU
LSES OFF
:TRIGGER:ATRIGGER:SENT:CEFACTOR:SCPU
LSES?
-> :TRIGGER:ATRIGGER:SENT:CEFACTOR:S
CPULSES OFF
:TRIGger{[:ATRigger]|:BTRigger}:SENT
:CRCType
Function Sets or queries the SENT signal trigger CRC
computation type.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
SENT:CRCType {LEGacy|RECommended}
:TRIGger{[:ATRigger]|:BTRigger}:
SENT:CRCType?
Example
:TRIGGER:ATRIGGER:SENT:CRCTYPE LEGAC
Y
:TRIGGER:ATRIGGER:SENT:CRCTYPE?
-> :TRIGGER:ATRIGGER:SENT:CRCTYPE LE
GACY
:TRIGger{[:ATRigger]|:BTRigger}:SENT
:CTICk
Function Sets or queries the SENT signal trigger clock tick
value.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
SENT:CTICk {<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:
SENT:CTICk?
<NRf> = 1.00 us to 100.00 us (resolution: 0.01 us)
Example
:TRIGGER:ATRIGGER:SENT:
CTICK 0.000001
:TRIGGER:ATRIGGER:SENT:CTICK?
-> :TRIGGER:ATRIGGER:SENT:
CTICK 1.000000E-06
:TRIGger{[:ATRigger]|:BTRigger}:SENT
:CTOLerance
Function Sets or queries the SENT signal trigger clock
tolerance.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
SENT:CTOLerance {<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:
SENT:CTOLerance?
<NRf> = ±1.0% to ±30.0% (resolution: 0.1%)
Example
:TRIGGER:ATRIGGER:SENT:
CTOLERANCE 25.0
:TRIGGER:ATRIGGER:SENT:CTOLERANCE?
-> :TRIGGER:ATRIGGER:SENT:
CTOLERANCE 25.0E+00
:TRIGger{[:ATRigger]|:BTRigger}:SENT
:DNIBbles
Function Sets or queries the number of data nibbles for
SENT signal analysis.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
SENT:DNIBbles {<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:
SENT:DNIBbles?
<NRf> = 1 to 6
Example
:TRIGGER:ATRIGGER:SENT:DNIBBLES 6
:TRIGGER:ATRIGGER:SENT:DNIBBLES?
-> :TRIGGER:ATRIGGER:SENT:DNIBBLES 6
:TRIGger{[:ATRigger]|:BTRigger}:SENT
:DTYPe
Function Sets or queries the SENT signal trigger fast
channel data format.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
SENT:DTYPe {NIBBle|USER}
:TRIGger{[:ATRigger]|:BTRigger}:
SENT:DTYPe?
Example
:TRIGGER:ATRIGGER:SENT:DTYPE NIBBLE
:TRIGGER:ATRIGGER:SENT:DTYPE?
-> :TRIGGER:ATRIGGER:SENT:DTYPE NIBB
LE
:TRIGger{[:ATRigger]|:BTRigger}:SENT
:ERRor?
Function Queries all SENT signal trigger error settings.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
SENT:ERRor?
5.34 TRIGger Group