YOKOGAWA DLM4038 User Manual

5-293
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le?
Function Queries all edge trigger settings.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le?
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:COUPling
Function Sets or queries the edge trigger source trigger
coupling.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:COUPling {AC|DC}
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:COUPling?
Example
:TRIGGER:ATRIGGER:SIMPLE:COUPLING AC
:TRIGGER:ATRIGGER:SIMPLE:COUPLING?
-> :TRIGGER:ATRIGGER:SIMPLE:COUPLIN
G AC
Description You cannot use this command when
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:SOURce
is set to EXTernal or LINE.
:TRIGger{[:ATRigger]|:BTRigger}:S
IMPle:HFRejection (High Frequency
REJECTION)
Function Sets or queries the on/off status of the trigger
source low-pass filter (HF rejection) for edge
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:HFRejection {<Frequency>|OFF}
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:HFRejection?
<Frequency> = 15 kHz to 20 MHz
Example
:TRIGGER:ATRIGGER:SIMPLE:HFREJECTI
ON 15KHZ
:TRIGGER:ATRIGGER:SIMPLE:HFREJECTI
ON?
-> :TRIGGER:ATRIGGER:SIMPLE:HFREJECT
ION 15000
Description You cannot use this command when
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:SOURce
is set to EXTernal or LINE.
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:HYSTeresis
Function Sets or queries the noise rejection setting for the
edge trigger source trigger level.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:HYSTeresis {HIGH|LOW}
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:HYSTeresis?
Example
:TRIGGER:ATRIGGER:SIMPLE:HYSTERES
IS HIGH
:TRIGGER:ATRIGGER:SIMPLE:HYSTERESIS?
-> :TRIGGER:ATRIGGER:SIMPLE:HYSTERES
IS HIGH
Description You cannot use this command when
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:SOURce
is set to EXTernal or LINE.
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:LEVel
Function Sets or queries the edge trigger source trigger
level.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:LEVel {<Voltage>}
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:LEVel?
<Voltage> = See the DLM4000 Features Guide
for this information.
Example
:TRIGGER:ATRIGGER:SIMPLE:LEVEL 0V
:TRIGGER:ATRIGGER:SIMPLE:LEVEL?
-> :TRIGGER:ATRIGGER:SIMPLE:LEVEL 0.
000E+00
Description • You cannot use this command when
:TRIGger{[:ATRigger]|:BTRigger}:SIM
Ple:SOURce
is set to EXTernal or LINE.
• When the probe type is set to current, this
command sets or queries the <Current> value.
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:PROBe
Function Sets or queries the external trigger source probe
setting for edge triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:PROBe {<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:PROBe?
<NRf> = 1, 10
Example
:TRIGGER:ATRIGGER:SIMPLE:PROBE 1
:TRIGGER:ATRIGGER:SIMPLE:PROBE?
-> :TRIGGER:ATRIGGER:SIMPLE:PROBE 1
Description You cannot use this command/query if
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:SOURce
is set to EXTernal or LINE.
5.34 TRIGger Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English