YOKOGAWA DLM4038 User Manual

5-300
IM DLM4038-17EN
:TRIGger{[:ATRigger]|:BTRigger}:UART
:DATA:CONDition
Function Sets or queries the data comparison condition
(true or false) for UART signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
UART:DATA:CONDition {DONTcare|TRUE}
:TRIGger{[:ATRigger]|:BTRigger}:
UART:DATA:CONDition?
Example
:TRIGGER:ATRIGGER:UART:DATA:CONDITI
ON DONTCARE
:TRIGGER:ATRIGGER:UART:DATA:CONDITI
ON?
-> :TRIGGER:ATRIGGER:UART:DATA:CONDI
TION DONTCARE
:TRIGger{[:ATRigger]|:BTRigger}:UART
:DATA:CSENsitive
Function Sets or queries whether to distinguish uppercase
and lowercase letters in ASCII data for the UART
bus signal trigger.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
UART:DATA:CSENsitive {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:
UART:DATA:CSENsitive?
Example
:TRIGGER:ATRIGGER:UART:DATA:CSENSITI
VE ON
:TRIGGER:ATRIGGER:UART:DATA:CSENSITI
VE?
-> :TRIGGER:ATRIGGER:UART:DATA:CSENS
ITIVE 1
:TRIGger{[:ATRigger]|:BTRigger}:UART
:DATA:DBYTe
Function Sets or queries the number of data bytes for
UART signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
UART:DATA:DBYTe {<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:
UART:DATA:DBYTe?
<NRf> = 1 to 4 (byte)
Example
:TRIGGER:ATRIGGER:UART:DATA:DBYTE 1
:TRIGGER:ATRIGGER:UART:DATA:DBYTE?
-> :TRIGGER:ATRIGGER:UART:DATA:DBYT
E 1
:TRIGger{[:ATRigger]|:BTRigger}:UART
:DATA:HEXa<x>
Function Sets the data for UART signal triggering in
hexadecimal notation.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
UART:DATA:HEXa<x> {<String>}
:TRIGger{[:ATRigger]|:BTRigger}:
UART:DATA:HEXa<x>?
<x> = 1 to 4
Example
:TRIGGER:ATRIGGER:UART:DATA:HE
XA1 "12"
:TRIGGER:ATRIGGER:UART:DATA:HEXA1?
-> :TRIGGER:ATRIGGER:UART:DATA:HE
XA1 "12"
:TRIGger{[:ATRigger]|:BTRigger}:UART
:DATA:PATTern<x>
Function Sets or queries the data value for UART signal
triggering in binary notation.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
UART:DATA:PATTern<x> {<String>}
:TRIGger{[:ATRigger]|:BTRigger}:
UART:DATA:PATTern<x>?
<x> = 1 to 4
Example
:TRIGGER:ATRIGGER:UART:DATA:PATTE
RN1 "00110101"
:TRIGGER:ATRIGGER:UART:DATA:PATTE
RN1?
-> :TRIGGER:ATRIGGER:UART:DATA:PATTE
RN1 "00110101"
:TRIGger{[:ATRigger]|:BTRigger}:UART
:DATA:PFORmat
Function Sets or queries the data input format, which is
one of the ID and data conditions, for UART
signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
UART:DATA:PFORmat {ASCii|BINary|
HEXa}
:TRIGger{[:ATRigger]|:BTRigger}:
UART:DATA:PFORmat?
Example
:TRIGGER:ATRIGGER:UART:DATA:PFORM
AT BINARY
:TRIGGER:ATRIGGER:UART:DATA:PFORMAT?
-> :TRIGGER:ATRIGGER:UART:DATA:PFORM
AT BINARY
:TRIGger{[:ATRigger]|:BTRigger}:UART
:ERRor?
Function Queries all UART signal trigger error settings.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
UART:ERRor?
5.34 TRIGger Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English