YOKOGAWA DLM4038 User Manual

5-307
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:TRIGger[:ATRigger]:WIDTh:{PODA|PODB
|PODL}:PATTern
Function Sets or queries the logic input state of the state
width trigger with a pattern.
Syntax
:TRIGger[:ATRigger]:WIDTh:{PODA|PODB
|PODL}:PATTern {<String>}
:TRIGger[:ATRigger]:WIDTh:{PODA|PODB
|PODL}:PATTern?
Example
:TRIGGER:ATRIGGER:WIDTH:PODL:PATTE
RN "10111000"
:TRIGGER:ATRIGGER:WIDTH:PODL:PATTE
RN?
-> :TRIGGER:ATRIGGER:WIDTH:PODL:PATT
ERN "10111000"
:TRIGger[:ATRigger]:WIDTh:TIME<x>
Function Sets or queries the pulse width setting for state
width triggering.
Syntax
:TRIGger[:ATRigger]:WIDTh:TIME
<x> {<Time>}
:TRIGger[:ATRigger]:WIDTh:TIME<x>?
<x> = 1 to 2
<Time> = 4 ns to 10 s (2-ns steps)
Example
:TRIGGER:ATRIGGER:WIDTH:TIME1 1S
:TRIGGER:ATRIGGER:WIDTH:TIME1?
-> :TRIGGER:ATRIGGER:WIDTH:TIME1 1.0
00E+00
:TRIGger[:ATRigger]:WIDTh:TYPE
Function Sets or queries the time width mode for state
width triggering.
Syntax
:TRIGger[:ATRigger]:WIDTh:TYPE {IN|O
UT|BETWeen|NOTBetween|TIMeout}
:TRIGger[:ATRigger]:WIDTh:TYPE?
Example
:TRIGGER:ATRIGGER:WIDTH:TYPE IN
:TRIGGER:ATRIGGER:WIDTH:TYPE?
-> :TRIGGER:ATRIGGER:WIDTH:TYPE IN
:TRIGger:COMBination
Function Sets or queries the trigger combination.
Syntax
:TRIGger:COMBination {ABN|ADB|AORB|O
FF}
:TRIGger:COMBination?
Example
:TRIGGER:COMBINATION ABN
:TRIGGER:COMBINATION?
-> :TRIGGER:COMBINATION ABN
:TRIGger:DELay?
Function Queries all delay settings.
Syntax
:TRIGger:DELay?
:TRIGger:DELay:TIME
Function Sets or queries the delay (the time between the
trigger point and the trigger position).
Syntax
:TRIGger:DELay:TIME {<Time>}
:TRIGger:DELay:TIME?
<Time> = 0 to 10 s (in steps of 1/sample rate)
Example
:TRIGGER:DELAY:TIME 2US
:TRIGGER:DELAY:TIME?
->:TRIGGER:DELAY:TIME2.00E−06
Description The delay is fixed at zero when the time base is
set to an external clock. The trigger delay is set
as the amount of time from the trigger point to the
trigger position. You can set or query the trigger
position by using “
:TRIGger:POSition
”.
:TRIGger:FORCe
Function Forces the DLM4000 to trigger.
Syntax
:TRIGger:FORCe
Example
:TRIGGER:FORCE
:TRIGger:HOLDoff?
Function Queries all hold-off settings.
Syntax
:TRIGger:HOLDoff?
:TRIGger:HOLDoff:TIME
Function Sets or queries the hold-off time.
Syntax
:TRIGger:HOLDoff:TIME {<Time>}
:TRIGger:HOLDoff:TIME?
<Time> = 20 ns to 10 s
Example
:TRIGGER:HOLDOFF:TIME 20NS
:TRIGGER:HOLDOFF:TIME?
->:TRIGGER:HOLDOFF:TIME20.0E−09
:TRIGger:MODE
Function Sets or queries the trigger mode.
Syntax
:TRIGger:MODE {AUTO|ALEVel|NORMal|NS
INgle}
:TRIGger:MODE?
Example
:TRIGGER:MODE AUTO
:TRIGGER:MODE?
-> :TRIGGER:MODE AUTO
Description You can set or query the count for “NSINgle” by
using
:TRIGger:SCOunt
.
:TRIGger:POSition
Function Sets or queries the trigger position.
Syntax
:TRIGger:POSition {<NRf>}
:TRIGger:POSition?
<NRf> = 0 to 100 (%, 0.1 steps)
Example
:TRIGGER:POSITION 50
:TRIGGER:POSITION?
-> :TRIGGER:POSITION 50.000
5.34 TRIGger Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English