YOKOGAWA DLM4038 User Manual

5-308
IM DLM4038-17EN
:TRIGger:SCOunt
Function Sets or queries the number of times the trigger
condition must be met when the trigger mode is
set to Single (N).
Syntax
:TRIGger:SCOunt {<NRf>}
:TRIGger:SCOunt?
<NRf> = 1 to 20000
Example
:TRIGGER:SCOUNT 100
:TRIGGER:SCOUNT?
-> :TRIGGER:SCOUNT 100
:TRIGger:SOURce?
Function Queries all trigger source settings for enhanced
triggering.
Syntax
:TRIGger:SOURce?
:TRIGger:SOURce:CHANnel<x>?
Function Queries all of the settings of the specified trigger
source for enhanced triggering.
Syntax
:TRIGger:SOURce:CHANnel<x>?
<x> = 1 to 8
:TRIGger:SOURce:CHANnel<x>:COUPling
Function Sets or queries the specified trigger source
trigger coupling for enhanced triggering.
Syntax
:TRIGger:SOURce:CHANnel<x>:COUPli
ng {AC|DC}
:TRIGger:SOURce:CHANnel<x>:COUPling?
<x> = 1 to 8
Example
:TRIGGER:SOURCE:CHANNEL1:COUPLING AC
:TRIGGER:SOURCE:CHANNEL1:COUPLING?
-> :TRIGGER:SOURCE:CHANNEL1:
COUPLING AC
:TRIGger:SOURce:CHANnel<x>:HFRejecti
on (HIgh Frequency REJECTION)
Function Sets or queries the low-pass filter setting of the
specified trigger source for enhanced triggering.
Syntax
:TRIGger:SOURce:CHANnel<x>:HFRejecti
on {<Frequency>|OFF}
:TRIGger:SOURce:CHANnel<x>:HFRejecti
on?
<x> = 1 to 8
<Frequency> = 15 kHz to 20 MHz
Example
:TRIGGER:SOURCE:CHANNEL1:HFREJECTI
ON 15KHZ
:TRIGGER:SOURCE:CHANNEL1:HFREJECTI
ON?
-> :TRIGGER:SOURCE:CHANNEL1:HFREJECT
ION 15000
:TRIGger:SOURce:CHANnel<x>:HYSTeres
is
Function Sets or queries the noise rejection setting of the
specified trigger source for enhanced triggering.
Syntax
:TRIGger:SOURce:CHANnel<x>:HYSTeres
is {HIGH|LOW}
:TRIGger:SOURce:CHANnel<x>:HYSTeres
is?
<x> = 1 to 8
Example
:TRIGGER:SOURCE:CHANNEL1:HYSTERES
IS HIGH
:TRIGGER:SOURCE:CHANNEL1:HYSTERESIS?
-> :TRIGGER:SOURCE:CHANNEL1:HYSTERES
IS HIGH
:TRIGger:SOURce:CHANnel<x>:LEVel
Function Sets or queries the trigger level of the specified
trigger source for enhanced triggering.
Syntax
:TRIGger:SOURce:CHANnel<x>:LEV
el {<Voltage>}
:TRIGger:SOURce:CHANnel<x>:LEVel?
<x> = 1 to 8
<Voltage> = See the DLM4000 Features Guide
for this information.
Example
:TRIGGER:SOURCE:CHANNEL1:LEVEL 0V
:TRIGGER:SOURCE:CHANNEL1:LEVEL?
-> :TRIGGER:SOURCE:CHANNEL1:LEVEL 0.
000E+00
Description When the probe type is set to current, this
command sets or queries the <Current> value.
:TRIGger:SOURce:CHANnel<x>:WIDTh
Function Sets or queries the window width of the specified
trigger source for enhanced triggering.
Syntax
:TRIGger:SOURce:CHANnel<x>:
WIDTh {<Voltage>}
:TRIGger:SOURce:CHANnel<x>:WIDTh?
<x> = 1 to 8
<Voltage> = See the DLM4000 Features Guide
for this information.
Example
:TRIGGER:SOURCE:CHANNEL1:WIDTH 5V
:TRIGGER:SOURCE:CHANNEL1:WIDTH?
-> :TRIGGER:SOURCE:CHANNEL1:WIDTH 5.
0E+00
Description When the probe type is set to current, this
command sets or queries the <Current> value.
5.34 TRIGger Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English