5-35
IM DLM4038-17EN
Commands
5
Command Function Page
:SERialbus<x>:SENT:SEARch[:SETu
p]:FDATa:DATA<y>:CONDition
Sets or queries the comparison condition of the specified user data of the
SENT signal search fast channel.
5-212
:SERialbus<x>:SENT:SEARch[:SETu
p]:FDATa:DATA<y>:DECimal<z>
Sets or queries the data of the specified user data of the SENT signal search
fast channel in decimal notation.
5-212
:SERialbus<x>:SENT:SEARch[:SETu
p]:FDATa:DATA<y>:MODE
Sets or queries the data enable/disable condition of the specified user data
of the SENT signal search fast channel.
5-213
:SERialbus<x>:SENT:SEARch[:SETu
p]:FDATa:DNIBbles?
Queries all fast channel nibble data settings for SENT signal searching. 5-213
:SERialbus<x>:SENT:SEARch[:SETu
p]:FDATa:DNIBbles:CONDition
Sets or queries the nibble data comparison condition of the SENT signal
search fast channel.
5-213
:SERialbus<x>:SENT:SEARch[:SETu
p]:FDATa:DNIBbles:HEXa
Sets the SENT signal search fast channel nibble data in hexadecimal
notation.
5-213
:SERialbus<x>:SENT:SEARch[:SETu
p]:FDATa:DNIBbles:PATTern
Sets or queries the SENT signal search fast channel nibble data in binary
notation.
5-213
:SERialbus<x>:SENT:SEARch[:SETu
p]:FDATa:DNIBbles:PFORmat
Sets or queries the data input format, which is one of the fast channel nibble
data conditions, for SENT signal searching.
5-213
:SERialbus<x>:SENT:SEARch[:SETu
p]:FSAComm?
Queries all fast channel status and communication nibble settings for SENT
signal searching.
5-213
:SERialbus<x>:SENT:SEARch[:SETu
p]:FSAComm:HEXa
Sets the SENT signal search fast channel status and communication nibble
data in hexadecimal notation.
5-213
:SERialbus<x>:SENT:SEARch[:SETu
p]:FSAComm:PATTern
Sets or queries the SENT signal search fast channel status and
communication nibble data in binary notation.
5-214
:SERialbus<x>:SENT:SEARch[:SETu
p]:FSAComm:PFORmat
Sets or queries the data input format, which is one of the fast channel status
and communication nibble data conditions, for SENT signal searching.
5-214
:SERialbus<x>:SENT:SEARch[:SETu
p]:MODE
Sets or queries the SENT signal search mode. 5-214
:SERialbus<x>:SENT:SEARch[:SETu
p]:SDATa?
Queries all slow channel data settings for SENT signal searching. 5-214
:SERialbus<x>:SENT:SEARch[:SETu
p]:SDATa:ENHanced?
Queries all slow channel enhanced type settings for SENT signal searching. 5-214
:SERialbus<x>:SENT:SEARch[:SETu
p]:SDATa:ENHanced:CBIT
Sets or queries the SENT signal search slow channel enhanced type
configuration bit.
5-214
:SERialbus<x>:SENT:SEARch[:SETu
p]:SDATa:ENHanced:D12Bit?
Queries all slow channel enhanced type 12-bit data and 8-bit ID settings for
SENT signal searching.
5-214
:SERialbus<x>:SENT:SEARch[:SETu
p]:SDATa:ENHanced:D12Bit:DATA?
Queries all slow channel enhanced type 12-bit data and 8-bit ID data settings
for SENT signal searching.
5-214
:SERialbus<x>:SENT:SEARch[:SETu
p]:SDATa:ENHanced:D12Bit:DATA:C
ONDition
Sets or queries the data comparison condition of slow channel enhanced
type 12-bit data and 8-bit ID for SENT signal searching.
5-215
:SERialbus<x>:SENT:SEARch[:SETu
p]:SDATa:ENHanced:D12Bit:DATA:D
ECimal<y>
Sets or queries the slow channel enhanced type 12-bit data and 8-bit ID data
for SENT signal searching in decimal notation.
5-215
:SERialbus<x>:SENT:SEARch[:SETu
p]:SDATa:ENHanced:D12Bit:DATA:H
EXa
Sets the slow channel enhanced type 12-bit data and 8-bit ID data for SENT
signal searching in hexadecimal notation.
5-215
:SERialbus<x>:SENT:SEARch[:SETu
p]:SDATa:ENHanced:D12Bit:DATA:M
ODE
Sets or queries the data enable/disable condition of the slow channel
enhanced type 12-bit data and 8-bit ID for SENT signal searching.
5-215
:SERialbus<x>:SENT:SEARch[:SETu
p]:SDATa:ENHanced:D12Bit:DATA:P
ATTern
Sets the slow channel enhanced type 12-bit data and 8-bit ID data for SENT
signal searching in binary notation.
5-215
:SERialbus<x>:SENT:SEARch[:SETu
p]:SDATa:ENHanced:D12Bit:DATA:P
FORmat
Sets or queries the data input format, which is one of the slow channel
enhanced type 12-bit data and 8-bit ID data conditions, for SENT signal
searching.
5-215
:SERialbus<x>:SENT:SEARch[:SETu
p]:SDATa:ENHanced:D12Bit:ID?
Queries all ID settings related to the slow channel enhanced type 12-bit data
and 8-bit ID for SENT signal searching.
5-216
:SERialbus<x>:SENT:SEARch[:SETu
p]:SDATa:ENHanced:D12Bit:ID:CON
Dition
Sets or queries the ID comparison condition of slow channel enhanced type
12-bit data and 8-bit ID for SENT signal searching.
5-216
:SERialbus<x>:SENT:SEARch[:SETu
p]:SDATa:ENHanced:D12Bit:ID:DEC
imal<y>
Sets the ID of the slow channel enhanced type 12-bit data and 8-bit ID for
SENT signal searching in decimal notation.
5-216
:SERialbus<x>:SENT:SEARch[:SETu
p]:SDATa:ENHanced:D12Bit:ID:MO
DE
Sets or queries the ID enable/disable condition of the slow channel enhanced
type 12-bit data and 8-bit ID for SENT signal searching.
5-216
5.1 List of Commands