1-223
IM 04L51B01-01EN
Configuring the GX/GP
1
Notification contents
Setup Item Selectable Range or Options Default Value
Title
Character string (up to 32 characters,
)
—
Notification message 1
Character string (up to 32 characters,
a
#
1
)
—
Notification message 2
Character string (up to 32 characters,
)
—
Buzzer Off, On Off
Title
Set the title to show on the notification screen.
Notification message 1, 2
Set the notification contents.
Buzzer
Set this to On to sound the buzzer.
Due date setting display
Setup Item Selectable Range or Options Default Value
Calibration correction settings Off, On Off
Calibration correction settings
Set this to On to show the calibration correction settings of AI channels in the due date
setting of the notification screen.
1.28.2 Notification Screen Display
When a daily reminder date arrives, a notification screen appears at 00:00 (HH:MM).
This screen reappears at the re-notification cycle.
If the buzzer is enabled, a buzzer is sounded when the notification screen appears.
Notification screen
Title
Last setting date
Due date
Due date setting
Notification content 1
Notification content 2
Contents displayed the notification screen
Other notification numbers
• Tap Due date setting to switch to the due date setting screen where you can reset the due
date and perform calibration correction (based on settings).
For details on Due date setting, see page 1-224 in section 1.28.3, “Resetting the
Calibration Reminder Due Date, Performing Calibration Correction”.
• If another notification screen appears when a notification screen is already displayed, the
one with the closer due date is prioritized.
For notifications other than the prioritized one, only their schedule numbers are displayed
in the form (Other notification: *,*,*).
1.28UsingtheAerospaceHeatTreatment(/AHoption)(Releasenumber3andlater)
To Next Page
Loading...
Need help?
General
