5-27
IM 04L51B01-01EN
Maintenance and Troubleshooting
5
Code Title Description and Corrective Action
Message
E8605 Communication error Follow the instruction below to restart the browser.
1 Close the browser.
2 Check the communication conditions.
3 Start the browser, and connect to the Web
application.
Communication error occurred. Please restart the
web browser.
E8608 No data. Please reload. The selected data does not exist. Reload the page to
retrieve the current information.
- Failed to change value. Failed to change an alarm value, DO output value, or
internal switch value.
This appears in the channel information dialog box.
- Failed to ACK alarm. Individual alarm ACK failed. This appears in the channel
information dialog box.
Warning Messages
Code Title Description and Corrective Action
Message
W8101 Clear the editing This confirmation message appears when you edit
settings and try to move to a different setting screen
without clicking Update Config.
Are you sure you want to clear the edited
content?
W8102 Reload configuration This confirmation message appears when you try to
change the language setting.
If the display language is changed, the page will
be reloaded.
W8103 Update configuration This confirmation message appears when you click
Update Config. in a setting screen.
Are you sure you want to update the hardware
configuration?
Auxiliary Message
1 Communication will be disconnected when
you change ethernet basic settings.If it be
disconnected, please reconnect with new
settings.
2 Communication will be disconnected when
you change to HTTP Off. You can not change
HTTP On from the web application.
3 Communication will be disconnected when
you change the port number for HTTP.
After the configuration is completed, please
reconnect with the new port number.
4 Change the communication security. After the
configuration is completed, the page reload or
user authentication are required.
5 Change user settings, including current log
in. After the configuration is completed, page
reload or user authentication are required.
6 Before save this configuration, do the user
registration from security settings - User
settings menu.
W8104 Update configuration This confirmation message appears after you change
the settings when the GX/GP needs to restart.
Restart is required to reflect this changes.
Continue?
W8105 Reload configuration This confirmation message appears when you click
Reload in a setting screen.
Are you sure you want to clear the edited
contents by reloading the configuration?
W8106 Destruction of editing This message appears for you to confirm whether
to discard the current monitor and move to different
content. If you want to save the monitor configuration,
register the monitor as a favorite monitor, and then
move to different content.
Are you sure you want to clear the edited
monitor?
Continued on next page
5.2 Troubleshooting
To Next Page
Loading...
Need help?
General
