5-28
IM 04L51B01-01EN
Code Title Description and Corrective Action
Message
W8107 Login user changed Due to a change in the user registration settings on the
GX/GP, an authentication procedure has occurred while
the Web application was running, and as a result, the
login user has changed. Click OK to reload the page.
Login user has chanded. The page will be
reloaded.
W8108 Hardware configuration This message appears on the system information
screen or network information screen when the system
configuration changes on the GX/GP. Click OK to
update the information.
Hardware system configuration has changed. The
information will be updated.
W8109 Limit of configuration editing This message appears when setting parameters are
loaded. It indicates that restrictions will be placed on the
configuration capabilities due to the GX/GP condition or
design limitations of the Web application.
This configuration includes contents that could
not be changed.
Auxiliary Message
1 The hardware is recording data or executing
math, so the configuration cannot upload.
2 The configuration you are loading includes
the contents that cannot be changed from the
web application.
W8110 Limit of configuration editing This message appears when settings are being
displayed. It indicates that restrictions will be placed on
the configuration capabilities due to changes in the GX/
GP condition.
The hardware was operated, so this operation will
affect the configuration.
Auxiliary Message
1 The hardware is recording data or executing
math, so the configuration cannot upload.
2 The hardware was operated. The
configuration is not fully compatible with the
existing configuration of hardware.
W8111 Save all This message appears during all settings save.
Save files to the current folder?
Auxiliary Message
• Setting parameters, Scale image, Report
template, Trusted Certificate, Certificate,
Custom display (/CG)
W8112 Load all This message appears during all settings load.
Load files from the current folder?
Auxiliary Message
• Setting parameters, Scale image, Report
template, Trusted Certificate, Custom display
(/CG)
W8122 Unverified certificate Check the certificate.
You can display the details of a problematic certificate
and execute authentication (or load) by using Unverified
certificate from the menu.
Communication failed due to certificate.
Auxiliary Message
1 Operation: Unverified certificate
W8123 Certificate This message appears during certificate installation
when a certificate is already installed when you are
creating a self-signed certificate.
Installed certificate exists. Overwrite the
certificate?
W8125 Communication This message appears while waiting for the results
of processing when some time elapses after
communication is disconnected.
Communication disconnected. Please reload
later.
W8127 Mode Switching This message appears when you click the Update
button for the A/D calibration content.
Switch to update mode?
W8129 Web application Set the Web browser zoom to 100%. This message
appears only once when you start the Web application.
Layout may be displayed incorrectly when the
Web browser zoom is not 100%.
W8134 Save all settings This confirmation message appears when the folder
name specified for all settings save already exists.
Same folder name exists, overwrite ?
Continued on next page
5.2 Troubleshooting
To Next Page
Loading...
Need help?
General
