5-15
IM 04L51B01-01EN
Maintenance and Troubleshooting
5
•ExecutionErrors
Code Message Description, Corrective Action, Ref. Section
201 Cannot execute because other users changed setting. Perform the operation again.
202 This action is not possible because recording or math computation is
in progress.
Execute after stopping recording or computing.
203 This action is not possible because sampling is in progress. Execute after stopping recording.
204 This action is not possible because math computation is in progress. Execute after stopping computing.
211 This function is not possible now. Check the GX/GP status, and then execute again.
212 This action is not possible because bar code data error. Check the character string to be read in from the
barcode.
213 This function is not available with invalid user.
214 This function is not available with logged out user. Log in and perform the operation.
221 This function is not possible because input number is over. The limit is 50 messages (10 for free messages).
222 Failed to write while recording stopped. Execute after starting recording.
223 Failed to write to postscript message area. There are no data files that messages can be written
in.
224 Failed to write message to outside of data range. Move within the data range.
225 Failed to print. For snapshot printing, wait a moment, and re-
execute.
Check the printer and network status.
226 This action is not possible because message writing. Wait until the additional message writing is finished.
231 This action is not possible because saving is in progress. Wait until saving is complete.
232 This action is not possible because formatting is in progress. Wait until formatting is complete.
233 Data save is not possible because of insufficient media capacity. Replace the external storage medium.
234 Invalid file or directory name. Use alphanumeric characters and symbols.
235 This action is not possible because FTP transmission is in progress. Execute after FTP data transfer is complete.
236 Cannot take successive snapshots. Wait 10 seconds or more in
between snapshots.
Wait 10 seconds or more
242 End process can't proceed, because setting file is not saved to
Media
Change the storage medium.
243 Exceeded max number of change. Reduce the number below the maximum number of
settings that can be changed.
244 Configuration error. Failed to change settings, initialize, or reconfigure.
Execute the operation again. (An error occurs if
the power is interrupted while the operation is in
progress.)
245 Execution error, lack of key. Set the encryption function to On in the Encryption/
Certificate screen of Init/Calib, and then create a key.
246 Failed to process input value. Check that the module is installed correctly.
251 Invalid user name or password. Enter the correct name or password.
252 The login password is incorrect. Check the password. If the password is lost, the
password must be initialized by an administrator.
253 A user already logged in. There is a user already logged in with the same
name or started the login operation.
254 This entry is incorrect. The maximum number of login users has been
exceeded.
255 Password entered is incorrect. Enter the correct password.
256 Same password not allowed. Specify a different password.
257 Password is incorrect. Enter the correct password.
258 This function is locked. Log in using a user account that has permission to
use the operation.
260 This user name is unable to use this mode. Users cannot switch modes.
261 Wrong user ID or password. Enter the correct user ID and password.
262 Log in failed, password expired. Change the password.
263 No change for default password. Set a password that is different from the default
password.
264 This user ID and password combination is already in use. Set them so that they are not overlapped.
265 Login inputs are incorrect. Enter the correct login information.
272 This password became invalid. On the GX/GP, because the wrong password has
been entered consecutively for more than the
permissible number of times, this user has been
locked out.
273 Invalid user. The account has been invalidated on the server.
The account has been invalidated on the GX/GP.
274 Please enter more than 6 characters. The account has been invalidated on the server.
The account has been invalidated on the GX/GP.
Continued on next page
5.2 Troubleshooting
To Next Page
Loading...
Need help?
General
