Scanner Emulation Interface 11 - 3
Scanner Emulation Parameter Defaults
Table 11-1 lists the defaults for the Scanner Emulation host. To change any option, scan the appropriate bar
code(s) provided in the Scanner Emulation Host Parameters section beginning on page 11-5.
NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 11-1
Scanner Emulation Default Table
Parameter Default Page Number
Beep Style Beep on Successful Transmit
11-5
Parameter Pass-Through Parameter Process and Pass Through
11-6
Convert Newer Code Types Convert Newer Code Types
11-7
Module Width 20 µs
11-8
Convert All Bar Codes to Code 39 Do Not Convert to Bar Codes to Code 39
11-8
Code 39 Full ASCII Conversion Disable
11-9
Transmission Timeout 3 seconds
11-10
Ignore Unknown Characters Ignore Unknown Characters
11-11
Leading Margin 2 ms
11-12
Check for Decode LED Check for Decode LED
11-13
To Next Page
Loading...
