Zebra LS2208 Reference Guide

Standard Default Parameters A - 5
Code 39
Code 39 Enable 12-24
Trioptic Code 39 Disable 12-24
Convert Code 39 to Code 32
(Italian Pharmacy Code)
Disable 12-25
Code 32 Prefix Disable 12-25
Set Length(s) for Code 39 2 to 55 12-26
Code 39 Check Digit Verification Disable 12-27
Transmit Code 39 Check Digit Disable 12-27
Code 39 Full ASCII Conversion Disable 12-28
Buffer Code 39 Disable 12-29
Code 93
Code 93 Disable 12-32
Set Length(s) for Code 93 4 to 55 12-26
Code 11
Code 11 Disable 12-34
Set Lengths for Code 11 4 to 55 12-35
Code 11 Check Digit Verification Disable 12-36
Transmit Code 11 Check Digit(s) Disable 12-37
Interleaved 2 of 5 (ITF)
Interleaved 2 of 5 (ITF) Enable 12-38
Set Lengths for I 2 of 5 14 12-39
I 2 of 5 Check Digit Verification Disable 12-40
Transmit I 2 of 5 Check Digit Disable 12-41
Convert I 2 of 5 to EAN 13 Disable 12-41
Discrete 2 of 5 (DTF)
Discrete 2 of 5 Disable 12-42
Set Length(s) for D 2 of 5 12 12-43
Table A-1 Standard Default Parameters Table (Continued)
Parameter Default Page Number
1
User selection is required to configure this interface and this is the most common selection.

Zebra LS2208 Specifications

General

Scan Technology	Laser
Connectivity	Wired
Scan Pattern	Single line
Drop Specification	Withstands multiple 5 ft./1.5 m drops to concrete
Scanner Type	Handheld
Scan Rate	100 scans per second
Humidity	5% to 95% (non-condensing)
Interface Options	USB, RS-232, Keyboard Wedge
Decode Capability	1D barcodes
Dimensions	15.2 cm H x 6.3 cm W x 8.4 cm D
Weight	146 g
Operating Temperature	0°C to 50°C
Resolution	5 mil
Supported Barcodes	UPC/EAN, Code 39, Code 128, GS1 DataBar
Storage Temperature	-40°C to 70°C