Zebra LS2208 Reference Guide

A - 6 LS2208 Product Reference Guide
Chinese 2 of 5
Enable/Disable Chinese 2 of 5 Disable 12-44
Codabar (NW - 7)
Codabar Disable 12-45
Set Lengths for Codabar 5 to 55 12-46
CLSI Editing Disable 12-47
NOTIS Editing Disable 12-47
MSI
MSI Disable 12-48
Set Length(s) for MSI 4 to 55 12-49
MSI Check Digits One 12-50
Transmit MSI Check Digit Disable 12-50
MSI Check Digit Algorithm Mod 10/Mod 10 12-51
GS1 DataBar (formerly RSS, Reduced Space Symbology)
GS1 DataBar-14 Disable 12-52
GS1 DataBar Limited Disable 12-52
GS1 DataBar Expanded Disable 12-53
Convert GS1 DataBar to UPC/EAN Disable 12-53
Symbology - Specific Security Levels
Redundancy Level 1 12-54
Security Level 0 12-56
Bi-directional Redundancy Disable 12-58
Intercharacter Gap Size Normal 12-58
Report Version 12-59
Report MIMIC Version 12-59
Report Synapse Cable 12-59
Table A-1 Standard Default Parameters Table (Continued)
Parameter Default Page Number
1
User selection is required to configure this interface and this is the most common selection.

Zebra LS2208 Specifications

General

Scan Technology	Laser
Connectivity	Wired
Scan Pattern	Single line
Drop Specification	Withstands multiple 5 ft./1.5 m drops to concrete
Scanner Type	Handheld
Scan Rate	100 scans per second
Humidity	5% to 95% (non-condensing)
Interface Options	USB, RS-232, Keyboard Wedge
Decode Capability	1D barcodes
Dimensions	15.2 cm H x 6.3 cm W x 8.4 cm D
Weight	146 g
Operating Temperature	0°C to 50°C
Resolution	5 mil
Supported Barcodes	UPC/EAN, Code 39, Code 128, GS1 DataBar
Storage Temperature	-40°C to 70°C