Zebra LS2208

Standard Default Parameters A - 7
Miscellaneous Scanner Options
Transmit Code ID Character None 13-3
Prefix Value 7013 <CR><LF> 13-4
Suffix Value 7013 <CR><LF> 13-4
Scan Data Transmission Format Data as is 13-4
FN1 Substitution Values Set 13-6
Transmit “No Read” Message Disable 13-6
Synapse Interface Standard 13-7
Table A-1 Standard Default Parameters Table (Continued)
Parameter Default Page Number
1
User selection is required to configure this interface and this is the most common selection.