Zebra Silverline ZT410 - Page 109

109
Printer Configuration and Adjustment
Adjust Printer Settings—RFID Settings
10/7/16 ZT410 RFID Printer for Silverline Media User Guide P1089083-001
RFID WRITE POWER
RFID Write
Power
If the desired write power is not achieved through RFID tag calibration, a value may be
specified.
User menu item:
Main Menu >
RFID
Accepted values:
0 to 30
Related ZPL command(s):
^RW
SGD command used:
rfid.reader_1.power.write
Printer web page: View and Modify Printer Settings > RFID Setup > RFID
WRITE PWR
RFID VALID COUNT
RFID Valid
Counter
Resets the RFID valid label counter to zero.
User menu item:
Main Menu >
RFID
Related ZPL command(s):
~RO
SGD command used:
odometer.rfid.valid_resettable
RFID VOID COUNT
RFID Void
Counter
Resets the RFID void label counter to zero.
User menu item:
Main Menu >
RFID
Related ZPL command(s):
~RO
SGD command used:
odometer.rfid.void_resettable
Table 7 • RFID Settings (Continued)