Zebra Silverline ZT410 - Page 186

Specifications
General Printer Specifications
186
P1089083-001 ZT410 RFID Printer for Silverline Media User Guide 10/7/16
Communication Interfaces
(continued)
Optional Wireless print server
WLAN Radio Specification
802.11 b
• 2.4GHz
• DSSS (DBPSK, DQPSK and CCK)
• RF power 63 mW (ZebraNet n Print Server)
802.11 g
• .4GHz
• OFDM (16-QAM and 64-QAM with BPSK and
QPSK)
• RF power 63 mW (ZebraNet n Print Server)
802.11 n
• 2.4GHz
• OFDM (16-QAM and 64-QAM with BPSK and
QPSK)
• RF power 63 mW (ZebraNet n Print Server)
802.11 a/n
• 5.15-5.25 GHz, 5.25-5.35 GHz, 5.47-5.725 GHz,
5.725-5.825 GHz
• OFDM (16-QAM and 64-QAM with BPSK and
QPSK)
• RF power 50 mW (ZebraNet n Print Server)
Limitations and Requirements
• Can print to the printer from any computer on your
Wireless Local Area Network (WLAN).
• Can communicate with the printer through the
printer’s web pages.
• The printer must be configured to use your WLAN.
• Can be installed only in the top option slot.
Configuration
Refer to the ZebraNet Wired and Wireless Print Servers
User Guide for configuration instructions. A copy of
this manual is available at
http://www.zebra.com/manuals.
8-bit Parallel data interface
nibble mode compliant
Limitations and Requirements
• Maximum cable length of 10 ft (3 m).
• Recommended cable length of 6 ft (1.83 m).
• No printer parameter changes required to match the
host computer.
• Can be installed in either the top or bottom option
slot.
Connections and Configuration
No additional configuration is necessary.