Printer Setup and Operation
Install the Printer Driver and Connect the Printer to the Computer—Ethernet
48
P1089083-001 ZT410 RFID Printer for Silverline Media User Guide 10/7/16
8. Click Next.
You are prompted to select an installation option.
9. Click Install Printer.
You are prompted to select a printer type.
10. Select your printer model and resolution.
The model and resolution are on a part number sticker on the printer, usually located
below the media hanger. The information will be in the following format:
Part Number: XXXXXxY – xxxxxxxx
where
XXXXX = the printer model
Y = the printer resolution (2 = 203 dpi, 3 = 300 dpi, 6 = 600 dpi)
For example, in the part number ZT410x3 – xxxxxxxx
ZT410 indicates that the printer is a ZT410 model
3 indicates that the printhead resolution is 300 dpi
To Next Page
Loading...