49
Printer Setup and Operation
Install the Printer Driver and Connect the Printer to the Computer—Ethernet
10/7/16 ZT410 RFID Printer for Silverline Media User Guide P1089083-001
11. Click Next.
You are notified that the printer is already installed.
12. Click Add new printer.
You are prompted for a printer name, the port to which the printer will be connected, and
the language for the printer display.
13. Click Add Port.
The wizard prompts you for a name for the port and the IP address of your printer.
n
Note • If you have other applications open, you may be prompted that the driver is
locked by another process. You may click Next to continue or Exit to allow you to save
your work before continuing with this installation.
To Next Page
Loading...