Printer Configuration and Adjustment
Adjust Printer Settings—Tool Settings
96
P1089083-001 ZT410 RFID Printer for Silverline Media User Guide 10/7/16
PRINT STATION
Fill in a Form or
Print a Label
Format from the
Display
Use this menu item to fill in variable fields in a label format and print the label using a
Human Input Device (HID), such as a USB keyboard or barcode scanner. A suitable
label format must be stored on the E: drive of the printer to use this option.
When the printer finds an HID plugged into the printer’s USB host port, it uses this user
menu to prompt you to select a form on the printer’s E: drive. After you have been
prompted to fill in each variable
^FN field on the form, you can specify the desired
quantity of labels to print.
For more information about using the
^FN command or the SGD commands related to
this feature, refer to the Zebra Programming Guide. You can download a copy of the
manual from http://www.zebra.com/manuals/.
User menu item: *
* This menu item appears only
if a USB Flash drive is
inserted into the USB host
port on the printer.
Main Menu > TOOLS
1. Insert a USB flash drive into the printer’s USB host
port.
The printer lists available files.
2. Use the UP ARROW or DOWN ARROW to select a
file from this menu.
3. Press RIGHT SELECT to select SELECT.
The printer accesses the file and prompts for the
information in the
^FN fields in the file.
4. Use your keyboard or barcode scanner to enter the
requested information. When using a keyboard,
press
<ENTER> after entering the appropriate
information in the field.
When all
^FN fields have been filled, the printer
prompts for the number of labels to print.
5. Specify the desired number of labels.
The specified number of labels is printed with your
data in the appropriate fields.
SGD command used:
usb.host.keyboard_input (must be set to ON)
usb.host.template_list
usb.host.fn_field_list
usb.host.fn_field_data
usb.host.fn_last_field
usb.host.template_print_amount
Table 5 • Tools (Continued)
To Next Page
Loading...