ZEISS Copyright Axio Observer
2 431004-7244-001 12/2016
Knowledge of this Operating Manual and the included safety instructions is required for operation of the
device. You should therefore familiarize yourself with the contents of these instructions, paying particular
attention to instructions concerning the safe handling of the device.
We reserve the right to make changes to the product in the interest of technological advancements. The
operating manual is not subject to updating or revision.
© Unless expressly authorized, dissemination and duplication of this document and commercial
exploitation or communication of its contents are not permitted. Persons in contravention of this
copyright shall be liable for damages.
All rights reserved in the event of granting of patents or registration as a utility model.
Company and product names cited in this manual may be trademarks or registered trademarks.
References to products of other manufacturers are for information purposes only and not intended as an
approval or a recommendation of these products.
Carl Zeiss Microscopy GmbH accept no liability for the performance or the use of these products.
Published by: Carl Zeiss Microscopy GmbH
Carl-Zeiss-Promenade 10
07745 Jena, Germany
microscopy@zeiss.com
www.zeiss.com/microscopy
Carl Zeiss Microscopy GmbH
Königsallee 9-21
37081 Göttingen, Germany
SAP number: 431004-7244-001
Date of issue (Version 4): 19/12/2016
To Next Page
Loading...
