OPERATION
Axio Observer Operating and function controls - overview ZEISS
12/2016 431004-7244-001 81
Key to Fig. 61:
1 Standby button (see page 84)
2 Left sideport (see page 84)
3 Coarse / fine focus drive (left side) with finger wheel for fine focus, flat (see page 84)
4 Vertical stop for focus drive (see page 93)
5 Light path selector wheel (left / right sideport / vis) (see page 84)
6 Light path selector wheel (baseport / vis / frontport)
7 Microscope stage (with inserted K mounting frame for reflected light and stage pinhole aperture)
8 Holder with LCD display (see page 94)
9 Slot F for iris diaphragm slider as reflected light luminous-field diaphragm (manual or motorized) (see page 89)
10 Slot for Polarizer slider RL 6x30 mm, 90° rotatable
11 Slot A for aperture diaphragm slider MAT or FL attenuator (manual or motorized) (see page 89)
12 Slot for 3-position filter slider, d=25 mm (see page 88)
13 LM-Set button (see page 92)
14 Drive knobs for controlling XY positioning of the mechanical stage (see page 89)
15 Right sideport
16 6-position nosepiece HD DIC M27 coded (see page 85)
17 Slot 6x20 for slider C-DIC and TIC
18 Slot for DIC slider
19 Reflector turret (coded or motorized) (see page 90)
20 Optovar turret selector wheel (max. 3 positions) (see page 92)
21 Coarse / fine focus drive (right side) (see page 90)
22 Control ring, right (see page 94)
23 RL button for switching the LED illuminator / HAL illuminator or the reflected light shutter (fluorescence) on and off
(see page 90)
24 Control wheel for LED / halogen illuminator illumination intensity control (see page 90)
25 Frontport
26 Binocular tube (see page 91)
27 Binocular section of tube (see page 92)
28 Eyepiece (see page 92)
29 Eyepiece focusing ring (see page 92)
To Next Page
Loading...
