80 81
ENGLISH
THE BASIC OPERATION
POWER ON/OFF
■ Press the POWER OFF/MUTE button to turn the unit on. You can also turn on the unit
by pressing the button ( ) on the remote.
■ Press and hold the POWER OFF/MUTE button on the front panel or press the POWER
button ( ) on the remote to power off the unit.
PLAYING SOURCE SELECTION
■ Press the SRC button on the front panel or the (SRC) button on the remote to change
between available playing sources:
TUNER →Disc →IPod →DTV →AUX IN →CAMERA (rear view video camera), NAVI →
SD Card. The playing mode is displayed on the TFT display.
■ AUX IN Mode
An external peripheral device can be connected to this unit via RCA output and “AUX-
IN”.
■ CAMERA Mode
The “CAMERA” mode is only available if the camera is connected and during reverse
driving. To install a rear view video camera, connect the video input cable to the camera
output cable.
VOLUME ADJUSTMENT
■ To increase or decrease the volume level, turn the SMART DIAL/VOL on the front panel
or press the VOL+/ VOL– buttons on the remote control. The volume ranges from “0”
to “40”. The LCD screen displays the volume level for 3 seconds. The default volume is
“10” when the unit is powered on each time.
Press and hold the POWER OFF/VOL button to store the adjusted loudness.
AUDIO CONTROL MENU
■ The audio control feature allows you to easily adjust your audio system to meet the
acoustical characteristics of your vehicle, which vary depending on the type of vehicle
and its dimensions. To get the best possible sound quality from your new system, be
sure to adjust the settings for the speakers as well. Proper setting of the fader and
balance boosts the effects of the cabin equalizer.
To Next Page
Loading...
