15.
Touch to change among the following bands: FM-1, FM-2, FM-3, AM-1.
16.
Touch to automatically scan and store stations in current radio band.
You can also press the AS/PS button on the unit.
17.
Touch to seek backward.
18.
Touch to seek forward.
19.
Touch to tune backward one step.
20.
Touch to tune forward one step.
21. PTY indicator.
SWITCH TO RADIO TUNER SOURCE
Press the SRC button on the front panel or on the remote control to switch to the tuner
source.
SELECT FM/AM BAND
Touch the BAND button
on the screen, or press the BAND button on the remote
control to change among the following bands: FM-1, FM-2, FM-3, AM-1.
AUTO TUNING
Press the
[:] button on the remote control or touch the button on the screen to seek
the next available channel by increasing the tuning frequency. Press the button again to
stop searching.
Press the
[9] button on the remote control or touch the button on the screen to seek
the next available channel by decreasing the tuning frequency. Press the button again to
stop searching.
MANUAL TUNING
Touch the
or button to increase or decrease the tuning frequency one step.
USING PRESET STATIONS
12 numbered preset buttons store and recall stations for each band. Front 6 stored stations
(P1-P6) for the current band appear on the screen, touch the channel directly for use.
You can touch the arrow
buttons on the screen to select other stations.
Storing a station
1. Select a band (if needed), then select a station.
2. Touch and hold an on-screen preset button (6) for three seconds. The preset number
appears at the top of the screen.
Recalling a station
1. Select a band (if needed).
2. Touch an on-screen preset button (6) to select the corresponding stored station.
To Next Page
Loading...
