1. Accessing the audio control menu
Press the SMART DIAL/VOL button on the front panel once or press the SEL button
on the remote control to display the “AUDIO” menu.
2. Selecting an audio feature for adjustment
Press the [5] or [6] button on the remote control or press the SMART DIAL/VOL
button on the front panel once to select an audio feature to be adjusted.
3. Adjusting an audio feature
Press the [3] or [4] button on the remote control or rotate the SMART DIAL/VOL
clockwise/anticlockwise to adjust the selected feature to the desired setting.
4. Audio adjustments:
Audio function Adjustable range
EQ User
Flat
Jazz
Pop
Classical
Rock
BASS –7 to +7
TREBLE –7 to +7
FADE –9 to +9
BAL –9 to +9
SUB –7 to +7
LOUD off, Lever 1–4
NOTE:
■ The bass and treble levels are only adjustable when EQ is set to “User” mode.
■ The loud function compensates for deficiencies in sound ranges at low levels. Loudness
levels range from 1–4 or “off”. When the loud function is on, LOUD is displayed on the
screen.
■ To exit the audio control menu. Stop making adjustments for a few seconds to exit the
audio control menu.
6-CHANNEL AUDIO CONTROL
Item Adjustable range
Master Volume 00 to 40
Front Left Channel Volume –10 to +10
Front Right Channel Volume –10 to +10
Rear Left Channel Volume –10 to +10
Rear Right Channel Volume –10 to +10
Center –10 to +10
Subwoofer Volume –10 to +10
To Next Page
Loading...
