Zenith L30W36 - Page 50

50
External Control Device Setup
17. Treble (Command:r)
G To adjust the treble.
You can also adjust treble in the Sound menu.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data Min : 0 ~ Max : 64
Data Min : 0 ~ Max : 64
*
Transmit as Hexadecimal code.
[r][ ][Set ID][ ][OK][Data][X]
16. PIP Position (Command:q)
G To select sub picture position for PIP.
You can also adjust the sub picture position using the
position button on the remote control or in WINDOW
POSITION on the TWIN/PIP menu.
T
ransmission
Data 0 : Right down on screen
1 : Left down on screen
2 : Left up on screen
3 : Right up on screen
[k][q][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0 : Right down on screen
1 : Left down on screen
2 : Left up on screen
3 : Right up on screen
[q][ ][Set ID][ ][OK][Data][X]
15. PIP Size (Command:o)
G To select PIP size.
Transmission
Data 0 : Normal screen (4:3)
1 : Wide screen (16:9)
[k][o][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0 : Normal screen (4:3)
1 : Wide screen (16:9)
[o][ ][Set ID][ ][OK][Data][X]
18. Bass (Command:s)
G To adjust the bass.
You can also adjust bass in the Sound menu.
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data Min : 0 ~ Max : 64
Data Min : 0 ~ Max : 64
*
Transmit as Hexadecimal code.
[s][ ][Set ID][ ][OK][Data][X]
19. Balance (Command:t)
G To adjust the balance.
You can also adjust balance in the Sound menu.
T
ransmission
[k][t][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data Min : 0 ~ Max : 64
Data Min : 0 ~ Max : 64
*
Transmit as Hexadecimal code.
[t][ ][Set ID][ ][OK][Data][X]