Zenith L30W36 - Page 51

51
Safety Instructions
Monitor Overview
Connections
Basic Operation
Sleep Timer
Picture & Sound
Special Features
Misc.
20. Color Temperature (Command:u)
G To set up with ‘normal, cool, warm, user’ in the color
temperature menu..
T
ransmission
[k][u][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0 : Normal 1 : Cool 2 : Warm 3 : User
Data 0 : Normal
1 : Cool
2 : Warm
3 : User
[u][ ][Set ID][ ][OK][Data][X]
21. R-Adjust (Command:v)
G To adjust ‘R-adjust’ red color temperature.
Transmission
[k][v][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data Min : 0 ~ Max : 64
Data Min : 0 ~ Max : 64
*
Transmit as Hexadecimal code.
[v][ ][Set ID][ ][OK][Data][X]
22. G-Adjust (Command:w)
G To adjust ‘G-adjust’ green color temperature.
Transmission
[k][w][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data Min : 0 ~ Max : 64
Data Min : 0 ~ Max : 64
*
Transmit as Hexadecimal code.
[w][ ][Set ID][ ][OK][Data][X]
23. B-Adjust (Command:$)
G To adjust ‘B-adjust’ blue color temperature.
Transmission
[k][$][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data Min : 0 ~ Max : 64
Data Min : 0 ~ Max : 64
*
Transmit as Hexadecimal code.
[$][ ][Set ID][ ][OK][Data][X]
24. Sub Picture Input Select
(Command:y)
[k][y][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data Min : 0 ~ Max : 4
Data Min : 0 ~ Max : 4
*
Transmit as Hexadecimal code.
[y][ ][Set ID][ ][OK][Data][X]
Data 0 : RGB1 4 : RGB2
1 : Component
2 : Video
3 : S-Video