SWT
GIGABIT/FAST ETHERNET SWITCH TYPE SWT 111/137
USER GUIDE - M0SWTA1903Iv09 - V09 March 2019
Configuration commands
add Adds a new item to the matrix of a matrix-type parameter.
Syntax: drn /> add name
Arguments:
name Parameter to which a new item is to be added.
Observations: To add a new item to a matrix-type parameter, it is
necessary to be in the directory in which it is located or
enter the relative route.
The new item created has the next order number with
respect to the last one. For instance, if nat[1] and nat[2]
already existed, on executing the command add nat the
item nat[3] is created.
Examples: drn /> add nat
drn /wan> add tunnel/tunnel
drn /admin> add ../nat
apply This applies the configuration changes in the equipment, but without saving
them.
Syntax: drn /> apply
Arguments: -
Observations: This command can be used irrespective of the directory
where the user is.
This command DOES NOT save the changes made.
Example: drn /> apply
To Next Page
Loading...
