SWT
GIGABIT/FAST ETHERNET SWITCH TYPE SWT 113/137
USER GUIDE - M0SWTA1903Iv09 - V09 March 2019
directory it shows the values of the parameters in that
directory. If the argument is the name of a configuration
parameter it shows the value of that parameter.
To show the complete configuration of the equipment, this
command must be executed with no arguments, from the
root directory.
If an argument is used, it must be in the current directory
or the relative route must be entered.
Examples: drn /> get
drn /> get main
drn /main> get hostname
drn /> get main/hostname
drn /admin> get ../main/hostname
remove This eliminates an item from the matrix of a matrix-type parameter.
Syntax: drn /> remove name[nº]
Arguments:
name Parameter from which the item is to be removed.
nº (Optional) Order number of the parameter item
Observations: To remove an item from the matrix of a matrix-type
parameter, it is necessary to be in the respective directory
or enter the relative route.
If the order number of the item to be removed is
indicated, that item will be removed. If the number is not
indicated, the last one will be removed.
When removing an item that is not the last one, the other
remaining items will be automatically renumbered.
Examples: drn /> remove nat[2]
drn /> remove nat
drn /admin> remove ../nat
To Next Page
Loading...
