SWT
GIGABIT/FAST ETHERNET SWITCH TYPE SWT 117/137
USER GUIDE - M0SWTA1903Iv09 - V09 March 2019
reboot This reboots the equipment without having to turn it off and on again, for
instance, in order to apply the saved configuration changes.
Syntax: drn /> reboot
Arguments: -
Observations: -.
Example: drn /> reboot
reload Reloads the saved configuration in the equipment.
Syntax: drn /> reload
Arguments: -
Observations: This command may be useful if it is required to reload the
configuration saved in the equipment after the time it was
saved.
Example: drn /> reload
telnet Open a telnet session, keeping the connection established between the
computer and the equipment open.
Syntax: drn /> telnet Host[Port]
Arguments:
Host Name of the destination host to which open a Telnet
session.
Port (optional) Number of the destination port where to open a
Telnet session.
Observations: To restart the session, it is necessary to re-enter the login
and password.
The 3 letters identifying the equipment can be used as
the host name.
Example: drn /> telnet drn
drn /> telnet 172.16.50.38 23
To Next Page
Loading...
