SWT
GIGABIT/FAST ETHERNET SWITCH TYPE SWT 119/137
USER GUIDE - M0SWTA1903Iv09 - V09 March 2019
log Shows the list of events stored in the log file in use (current).
Syntax: drn /> log
Arguments:
- Without arguments, this command shows the events
recorded in the current log file.
Observations: All the events taking place in the equipment are stored in
files permanently. The maximum number of files is 5. The
files are used in rotation but always remains a name that
sets the timing, by using a suffix. The higher the suffix
oldest is the file contents. Use the show command to
display the oldest files.
You can filter at will the temporary log, using the text as a
filter after the command. This operation works with any
text in the filter, not only with the category (see section
Information in the log), so it is possible to filter traces of
individual processes or selected events.
Example: drn /> log
drn /> log crit
drn /> log debug
ls Shows a list from the active directory. This command is useful for verifying
whether the configuration parameter to be consulted/changed is in the active
directory.
Syntax: drn /> ls
Arguments: -
Observations: -
Example: drn /> ls
To Next Page
Loading...
