SWT
GIGABIT/FAST ETHERNET SWITCH TYPE SWT 120/137
USER GUIDE - M0SWTA1903Iv09 - V09 March 2019
ping This sends ICPM ECHO_REQUEST packets to a specific host.
Syntax: drn /> ping host
Arguments:
host Host name or destination IP address.
Observations: When this command is executed the equipment starts to
send pings to the indicated host until the user presses the
Ctrl.+C keys.
Example: drn /> ping 172.16.50.38
drn /> ping emr
show Shows the contents of the log file specified.
Syntax: drn /> show file
Arguments:
file Name of the file desired to display. The log file in use
(current) is named messages. Oldest log files include a
suffix, e.g. messages.1.
Observations: The maximum number of log files to display is 5:
messages (current log), messages.0, messages.1,
messages.2 and messages.3. The files store data with
periodic-continuous display. The higher the suffix oldest is
the file contents.
The customer default configuration file is stored as
customer.txt.
Example: drn /> show messages
drn /> show messages.0
drn /> show messages.1
drn /> show messages.2
drn /> show messages.3
drn /> show customer.txt
To Next Page
Loading...
