Zodiac pH Link - pH Link;Dual Link Module Installation; Installing the pH Link;Dual Link Module

17
2.5.8 Reassembling the appliance
• Posion the boom protecve cover (or the pH Link/Dual Link module) on the appliance and screw in the
2 side screws (see gure
).
• Clip the aesthec housing of the control box in place (see gure ).
• If a pH Link or Dual Link module has been installed, do not reconnect the electricity supply
unl the module, the POD kit and the pH minus injecon pipe have been installed.
EN