Zodiac pH Link - Filter Pump and Timer Configuration

30
5.2.3 Seng the me
The me must be set for the "TIMERS" ltering programmes and for the "HYDROX" chlorinaon programmes to work.
The me is set when rst using the appliance. If the me must be changed at a later moment, follow the instrucons
below:
• To change the me, press and browse using the buons.
• Conrm the selecon by pressing .
• Press to exit.
5.2.4 Selecng the lter pump
The lter pump can be directly connected to and managed by the appliance.
• To achieve this, the lter pump must have already been connected to the power supply, see “2.5.2
Idenfying the funcons to be connected”.
• To declare the presence of the lter pump, press . Browse the menu using the buons.
Press
to conrm.
• Select the type of lter pump and conrm that the connecon has been made properly:
• Connue conguraon by programming the "TIMERS" ltraon mes, see “5.2.5 Programming the
“TIMERS” ltraon mes”.