33
5.2.6 Programming the "HYDROX" chlorinaon mes
If a ltraon programme has been dened, the chlorinaon programme will be idencal to the ltraon programme(s)
by default. They can be changed, however the chlorinaon programmes cannot be acvated outside of the ltraon
programmes for safety reasons.
• Press and browse using the buons. Conrm the selecon by pressing .
• Select "HYDROX TIMER 1" or "HYDROX TIMER 2":
• Set the chlorinaon mes "ON" and "OFF" using the buons.
• Conrm the selecon by pressing .
The chlorinaon duraon must be less than or equal to the ltraon duraon
The appliance does not allow for a me delay for chlorinaon that exceeds or that falls outside of the
programmed ltraon duraon.
• Press to exit.
• When the chlorinaon mes programme has been conrmed, the leer "T" is shown on the screen:
• When the chlorinaon and ltraon mes programmes have been conrmed, the leer "P" is shown on
the screen:
EN