Zodiac pH Link - Page 37

36
5.2.9 Declaring a heang system (AUX 2)
• To achieve this, the heang system must have already been connected to the power supply, see “2.5.7
Connecng to a heang system = AUX2 - 12-24V”.
• To declare the presence of a heang system, press . Browse the menu using the buons.
Press
to conrm.
• Once the heang system has been declared, a dedicated sub-menu called "TEMP CONTROL" is shown in
.
• The heang management system is now automacally acvated. It can be deacvated, for example for
winterising:
When a heang system has been declared on AUX2, the AUX2 mer is no longer available. Heang
will thus take place within the operang periods (mers) of the ltraon system.