Zodiac pH Link - Page 45

44
5.3.4 Conguring the ORP setpoint
The ORP setpoint conguraon determines the me at which chlorine is produced by the appliance. The level of free
chlorine must be controlled at regular intervals aer inial installaon. The default value of the ORP setpoint is 700 mV.
The value of the setpoint depends on the pool's environment, its auence, and the amount of stabiliser present in the
pool water, etc.
• Press and browse the menu using the buons. Press to conrm.
• Select the desired setpoint value (from 600 mV to 900 mV) using the buons.
• Press to conrm.
(ORP = Oxidaon Reducon Potenal)
5.3.5 Acvang the pH pump
To prevent exposure to acid during installaon, the dispenser pump is deacvated for the rst 8 hours of operaon;
during these rst 8 hours, the pH value is measured and displayed as "- - - -".
• Hydrochloric acid is a hazardous chemical that may cause burns, lesions and irritaons.
Handle with care and use protecve equipment (gloves, safety glasses, overalls). Refer to the
product's MSDS for more informaon.
• Always pour the acid into the water.
• Once cleaning is complete, dispose of the soluon according to the standard in force in the
country of use.
• The pH pump can be manually acvated during this 8-hour period; press and browse the menu
using the
buons. Press to conrm.
• Press to exit.