Setting automatic timecode recording delay (Auto Rec Delay Time)
If set to record automatically when external timecode is received, unnecessary recording could occur when
timecode is received for a brief amount time. In order to prevent this, you can set the amount of time until
recording starts after timecode is received.
1. Press .
This opens the Menu Screen.
2. Use to select “TIMECODE”, and press .
3. Use to select “Auto Rec Delay Time”, and press .
4. Use to adjust the time, and press .
HINT:
This can be set from 0.0 to 8.0 s.
152
To Next Page
Loading...
