Zoom F8n Pro - Page 182

■ Recording
1. Press to start recording.
2. Push left toward the mic symbol and release.
3. To disable the slate mic, push left toward the mic symbol again and release.
NOTE:
• When the slate mic is in use, other signals input to the tracks that it is routed to are muted.
• The slate mic signal is always routed to the headphone L/R channels regardless of other routing settings.
• The MAIN OUT 1/2 and SUB OUT 1/2 faders do not affect the levels of the slate mic and slate tone.
HINT:
If you push and hold left toward the mic symbol for two or more seconds, the slate mic will be
enabled until you release the switch.
182