■ Recording
1. Press to start recording.
2. Push right toward the tone symbol and release.
NOTE:
• When the slate tone is in use, other signals input to the tracks that it is routed to are muted.
• The slate tone signal is always routed to the headphone L/R channels regardless of other routing settings.
• The MAIN OUT 1/2 and SUB OUT 1/2 faders do not affect the levels of the slate mic and slate tone.
HINT:
If you push and hold right toward the tone symbol for one or more seconds, the slate tone will be
enabled until you push the switch toward the tone symbol again.
191
To Next Page
Loading...
