5. Use a USB cable to connect the F8n Pro and the computer or iOS/iPadOS device.
❶
iOS/iPadOS device
❷
Computer (Windows/Mac)
The audio interface screen is displayed.
❶
Operation mode
The current operation mode is displayed.
NOTE:
• Use a Lightning to USB 3 Camera Adapter to connect to an iOS/iPadOS device.
• Use a USB cable that supports data transfer.
• The F8n Pro cannot operate on USB bus power. Use the internal batteries, the dedicated AC adapter or
an external DC power supply to power it.
• When the F8n Pro is used as an audio interface and the sampling rate is set to 44.1/48 kHz, latency
increases 2 ms. When latency increases while monitoring sounds being recorded with a mic in real-
time, interference occurs between sound transmitted through the air from the source and the delayed
monitored sound, possibly making accurate monitoring of the sounds difficult.
236
To Next Page
Loading...
