Setting items Explanation
Input Source Sets the input source. (→Setting the input source (Input Source))
Trim Sets the input level. (→Adjusting input levels )
Phantom Makes the phantom settings. (→Changing the phantom power
settings (Phantom))
HPF Sets the high pass filter. (→Cutting low-frequency noise (HPF))
Input Limiter Sets the limiter. (→Using the input limiter (Input Limiter))
Fader Makes the fader setting.
Pan Makes the pan setting.
Phase Invert Sets the phase of the input signal. (→Inverting the input phase (Phase
Invert))
Side Mic Level Sets the side mic level of a mid-side mic capsule. (→Adjusting the side
level of a mid-side mic capsule (Side Mic Level))
Input Delay Sets the input delay. (→Delaying input signals (Input Delay))
Plugin Power Makes the plugin power setting. (→Changing the plugin power setting
(Plugin Power))
Stereo Link Sets the stereo link. (→Linking inputs as a stereo pair)
Stereo Link Mode Sets the stereo link mode. (→Converting mid-side input to ordinary
stereo (Stereo Link Mode))
PFL Mode Sets the monitor sound while the PFL Screen is displayed. (→Setting
the monitoring sound on the PFL Screen (PFL Mode))
24
To Next Page
Loading...
