Zoom H8 - Power Management and HOLD Function

Turning the power on/off
Turning the power on
1.
Slide toward .
Turning the power off
1.
Keep sliding toward until the ZOOM logo appears.
NOTE
• If “No Card!” appears on the display, conrm that an SD card is inserted properly.
• If “Card Protected!” appears on the display, the SD card write-protection is enabled. Slide the lock switch on
the SD card to disable write-protection.
• If “Invalid SD Card!” appears on the display, the card is not formatted correctly. Format the card or use a differ-
ent card. (
→
“Formatting SD cards” on page 112)
Preventing misoperation (HOLD function)
In order to prevent misoperation, the HOLD function can be used to disable operation of the H8 buttons and
touchscreen.
1.
Slide to HOLD.
█
Deactivating the hold function
Slide back to the middle.
18