Adjusting connected equipment levels (playing test tones)
The line output level can be adjusted.
Test tones can be played in order to adjust the level for a digital SLR camera or other device.
1.
Minimize the input volume of the other device.
2.
Use an audio cable to connect the external mic jack of the other device with the H8 LINE OUT jack.
3.
Tap Line Output Level on the Home Screen.
4.
Tap Test Tone.
This starts output of the test tone.
5.
Slide the line output LEVEL slider to adjust the output level.
While checking the audio level meter of the other device, adjust the audio signal level so that it never
exceeds −12 dB.
41
To Next Page
Loading...
