Chapter 17 Parental Control
EMG2926-Q10A User’s Guide
124
The following table describes the fields in this screen.
17.3 Technical Reference
The following section contains additional technical information about the EMG2926-Q10A features
described in this chapter.
17.3.1 Customizing Keyword Blocking URL Checking
You can use commands to set how much of a website’s URL the content filter is to check for
keyword blocking. See the appendices for information on how to access and use the command
interpreter.
Domain Name or IP Address URL Checking
By default, the EMG2926-Q10A checks the URL’s domain name or IP address when performing
keyword blocking.
This means that the EMG2926-Q10A checks the characters that come before the first slash in the
URL.
For example, with the URL www.zyxel.com.tw/news/pressroom.php
, content filtering only searches
for keywords within www.zyxel.com.tw
.
Full Path URL Checking
Full path URL checking has the EMG2926-Q10A check the characters that come before the last
slash in the URL.
For example, with the URL www.zyxel.com.tw/news/pressroom.php
, full path URL checking
searches for keywords within www.zyxel.com.tw/news/
.
Use the ip urlfilter customize actionFlags 6 [disable | enable] command to extend (or
not extend) the keyword blocking search to include the URL's full path.
Table 50 Security > Parental Control > Add/Edit new rules > Add/Edit new service
LABEL DESCRIPTION
Service Name Select the name of the service. Otherwise, select UserDefined and manually specify the
name, protocol and the port of the service.
Protocol Select the transport layer protocol used for the service. Choices are TCP, UDP, or TCP/
UDP.
If you have chosen a pre-defined service in the Service Name field, this field will not be
configurable.
Port Enter the port of the service.
If you have chosen a pre-defined service in the Service Name field, this field will not be
configurable.
Apply Click Apply to save your settings with the EMG2926-Q10A.
Back Click Back to return to the previous screen.
To Next Page
Loading...
