Chapter 6 Tutorials
EMG2926-Q10A User’s Guide
43
7 Check the status of your wireless connection in the screen below.
8 If the wireless client keeps trying to connect to or acquiring an IP address from the EMG2926-
Q10A, make sure you entered the correct security key.
If the connection has limited or no connectivity, make sure the DHCP server is enabled on the
EMG2926-Q10A.
If your connection is successful, open your Internet browser and enter http://www.zyxel.com or the
URL of any other web site in the address bar. If you are able to access the web site, your wireless
connection is successfully configured.
6.4 Using Multiple SSIDs on the EMG2926-Q10A
You can configure more than one SSID on a EMG2926-Q10A. See Section 9.4 on page 79.
This allows you to configure multiple independent wireless networks on the EMG2926-Q10A as if
there were multiple APs (virtual APs). Each virtual AP has its own SSID, wireless security type and
MAC filtering settings. That is, each SSID on the EMG2926-Q10A represents a different access
point/wireless network to wireless clients in the network.
Clients can associate only with the SSIDs for which they have the correct security settings. Clients
using different SSIDs can access the Internet and the wired network behind the EMG2926-Q10A
(such as a printer).
To Next Page
Loading...
