EMG2926-Q10A User’s Guide
191
APPENDIX B
Setting Up Your Computer’s IP Address
Note: Your specific EMG2926-Q10A may not support all of the operating systems
described in this appendix. See the product specifications for more information
about which operating systems are supported.
This appendix shows you how to configure the IP settings on your computer in order for it to be
able to communicate with the other devices on your network. Windows Vista/XP/2000, Mac OS 9/
OS X, and all versions of UNIX/LINUX include the software components you need to use TCP/IP on
your computer.
If you manually assign IP information instead of using a dynamic IP, make sure that your network’s
computers have IP addresses that place them in the same subnet.
In this appendix, you can set up an IP address for:
• Windows XP/NT/2000 on page 191
• Windows Vista on page 195
• Windows 7 on page 199
• Mac OS X: 10.3 and 10.4 on page 203
• Mac OS X: 10.5 and 10.6 on page 206
• Linux: Ubuntu 8 (GNOME) on page 209
• Linux: openSUSE 10.3 (KDE) on page 213
Windows XP/NT/2000
The following example uses the default Windows XP display theme but can also apply to Windows
2000 and Windows NT.
1 Click Start > Control Panel.
To Next Page
Loading...
