Chapter 24 Maintenance
EMG2926-Q10A User’s Guide
172
Figure 113 Access Point Mode
24.10 Sys OP Mode Screen
Use this screen to select how you want to use your EMG2926-Q10A.
Note: If you select the incorrect System Operation Mode you may not be able to connect
to the Internet.
Figure 114 Maintenance > Sys OP Mode
The following table describes the labels in the Sys OP Mode screen.
Table 69 Maintenance > Sys OP Mode
LABEL DESCRIPTION
Configuration Mode
Router Mode Select Router Mode if your device routes traffic between a local network and another
network such as the Internet. This mode offers services such as a firewall or bandwidth
management.
You can configure the IP address settings on your WAN port. Contact your ISP or system
administrator for more information on appropriate settings.
To Next Page
Loading...
