ZyXEL Communications EMG2926-Q10A - Chapter 24 Maintenance

EMG2926-Q10A User’s Guide
164
CHAPTER 24
Maintenance
24.1 Overview
This chapter provides information on the Maintenance screens.
24.2 What You Can Do
•Use the General screen to set the timeout period of the management session (Section 24.3 on
page 164).
•Use the Account screen to change your EMG2926-Q10A’s system password (Section 24.4 on
page 165).
•Use the Time screen to change your EMG2926-Q10A’s time and date (Section 24.5 on page
166).
•Use the Firmware Upgrade screen to upload firmware to your EMG2926-Q10A (Section 24.6 on
page 168).
•Use the Backup/Restore screen to view information related to factory defaults, backup
configuration, and restoring configuration (Section 24.8 on page 171).
•Use the Restart screen to reboot the EMG2926-Q10A without turning the power off (Section
24.8 on page 171).
•Use the Sys OP Mode screen to select how you want to use your EMG2926-Q10A (Section 24.10
on page 172).
•Use the Language screen to change the language for the Web Configurator (Section 24.11 on
page 173).
•Use the Diagnostic > Ping screen to ping an IP address (Section 24.12 on page 173).
24.3 General Screen
Use this screen to set the management session timeout period. Click Maintenance > General.
The following screen displays.